Connecting The Network Cable To The Machine - Gestetner CP6244 Operating Instructions Manual

Getting Started

Connecting the Network Cable to the Machine

Important
1 ❒ Before connecting an interface cable between the machine and a computer,
make sure that the machine is not operating, and then turn off the main power
switches of the machine and the computer.
❒ Be sure to use the designated interface cable. Using another cable may cause
radio interference.
After setting up this machine to support the network environment, connect the
Ethernet interface cable. Connect a 10BASE-T or 100BASE-TX cable to the Ether-
net board.
A A A A
Connect the Ethernet interface cable into the Ethernet interface at the right
side of the back of the machine.
❖ ❖ ❖ ❖ Type A
❖ ❖ ❖ ❖ Type B
18
ZJXH170J