Gestetner CP6244 Operating Instructions Manual page 273

NetBEUI (When the Network Interface Board is started)
Back to default name (<Computer name>)
Print session full
Required computer name (<Computer
name>) is duplicated name
TCP/IP
When the address is configured
Invalid gateway address
When using lpr
filter data error
lost connection
print requests full
printer permission denied
printer refuse
At the beginning of the message, the IP address of the client is displayed with-
in parentheses.
The same computer name is detected on the
network. As unable to add computer name to
the suffix, the computer name back to default
name. Configure a new computer name that is
unique.
Cannot accept the print session.
The same computer name is detected on the
network. The start job determines the compu-
ter name by adding the computer name to the
suffix (0,1....). Configure a new computer
name that is unique.
The gateway address is not correct for the
specified IP address.
Some data cannot be handled by the filter
option. Confirm the file code and the settings
of the filter option.
The connection was cut by the other party.
Check the machine to which you requested
to print.
Cannot accept the print request (max. 5 ses-
sions). Confirm the status of the machine
with lpq, rsh, rcp or ftp, and print it again af-
ter the print request becomes less than 5 ses-
sions.
However, the maximum request when using
ftp command is 3.
Cannot get permission to use the machine.
Confirm the access rights with the access
control address and the access control mask.
Something is wrong with the machine. Con-
firm the status of the machine.
Message List
7
109