Gestetner CP6244 Operating Instructions Manual page 456

Operation
Storing Stack Memory Mode Settings
Limitation
❒ To use Stack Memory mode, you
1
need to first set Memory Mode to
"Stack" using the user tools. See
"12 Memory Mode" on p.79 "4
Mode Setting".
A
Press the {User Tools} key.
B
Use the {~}{}} keys to select 3
Initial Setting, and then press the
{OK} key.
C
Use the {~}{}} keys to select 8
Prog./Change:Mem., and then
press the {OK} key.
50
D
Use the {~}{}} keys to select a
number, and then press the {OK}
key.
Note
❒ If the number is already in use,
a message will be displayed
asking if you wish to overwrite
the settings stored. To over-
write, press the {OK} key. Oth-
erwise press the {Escape} key to
return to the previous display,
and then select another number.
E
With the number keys, enter the
number of prints for each class,
and then press the {q} key.
ZLKS084N
Note
❒ Repeat Steps
all your classes.
F
Press the {OK} key.
G
Press the {Clear Modes/Energy Sav-
er} key.
The contents that you have stored
are now effective.
D E
and to register