Gestetner CP6244 Operating Instructions Manual page 234

NetWare Configuration
Setting Up a Client Computer
This section describes how to set up a client computer when using a NetWare
print server.
Note
This section assumes that the client has NetWare client applications installed
and is correctly configured to communicate with a NetWare print server. If
not, install the necessary applications before starting the setting up proce-
dure.
Windows 95/98/Me
Follow the procedure to set up a Windows 95/98/Me client.
Preparation
5
Log on to the NetWare file server before starting the following procedure.
A A A A
Install the printer driver you want to use as "Local printer".
Reference
For more information about installing the printer driver, see Printer Refer-
ence 1.
Note
Any port can be selected during the installation, however, LPT1 is recom-
mended.
B B B B
Click [Start], point to [Settings], and then click [Printers].
C C C C
In the [Printers] window, click the icon of the machine you want to use.
D D D D
On the [File] menu, click [Properties].
E E E E
Click the [Details] tab, and click [Add Port].
F F F F
Click [Network] and click [Browse].
G G G G
On the network tree, double-click the name of the file server.
The queues are displayed.
H H H H
Click the queue you want to print, and click [OK].
I I I I
Click [OK].
In the [Print to the following port:] box, a network path to the printer appears.
J J J J
Click [OK] to close the Printer Properties, and again, open it.
70