Storing Class Mode Settings - Gestetner CP6244 Operating Instructions Manual

Storing Class Mode Settings

A
Press the {User Tools} key.
B
Use the {~}{}} keys to select 3
Initial Setting, and then press the
{OK} key.
C
Use the {~}{}} keys to select 7
Prog./Change:Clss, and then
press the {OK} key.
D
Use the {~}{}} keys to select a
number, and then press the {OK}
key.
Note
❒ If the number is already in use,
a message will be displayed
asking if you wish to overwrite
the settings stored. To over-
write, press the {OK} key. Oth-
ZLKS084N
erwise press the {Escape} key to
return to the previous display,
and then select another number.
E
With the number keys, enter the
number of prints, and then press
the {q} key.
F
With the number keys, enter the
number of classes, and then press
the {q} key.
Note
❒ Repeat Steps
all your classes.
G
Press the {OK} key.
H
Press the {Clear Modes/Energy Sav-
er} key.
The contents that you have stored
are now effective.
Recall
D F
to to register
1
51