Gestetner CP6244 Operating Instructions Manual page 207

E E E E
Type the name of the CD-ROM drive in the [Command line for installation pro-
gram] box, followed by ":\ NETWORK\NETMON\CLIENT\DISK1\SET-
UP.EXE" (do not include the quotation marks), and then click [Finish].
Note
An example would be "D:\ NETWORK \ NETMON \ CLIENT \ DISK1
\ SETUP.EXE" when the CD-ROM drive letter is "D".
F F F F
From the [Choose Setup Language] list, select the language you want to use,
and then click [OK].
G G G G
After the [Welcome] dialog box appears, click [Next >].
Follow the instructions on the screen.
After the installation is complete, configure the printer port with SmartDe-
viceMonitor for Client. See p.44 "Setting Up the Printer Driver".
Note
If the dialog box asking if you want to restart the computer appears, select
[Yes, I want to restart my computer now.].
Deleting the port
The following procedure allows you to delete the printer port. If you want to de-
lete the port which is currently used in Windows, switch the port to another such
as "FILE", then delete it.
Reference
For more information about SmartDeviceMonitor for Client, see SmartDe-
viceMonitor for Client Help.
A A A A
From the [Printers] window, click the icon of the machine which uses Smart-
DeviceMonitor for Client to print. On the [File] menu, click [Properties].
B B B B
Click the [Ports] tab and make sure that the SmartDeviceMonitor for Client
port is shown in the [Print to the following port(s)] box.
Remember the port name because this port should be deleted later.
C C C C
From the [Print to the following port(s)] box, select [FILE].
D D D D
Click [OK].
The port which is currently in use is changed.
E E E E
Click [Delete Port].
F F F F
After the confirmation message appears, click [Yes].
The port is deleted.
G G G G
Click [OK] to close the Printer Properties.
Using SmartDeviceMonitor for Client
4
43