Gestetner CP6244 Operating Instructions Manual page 281

D D D D
Enter your user name and password, and then click [OK].
To use the factory default account, enter no user name and type "password"
for the password.
E E E E
Click [TCP/IP].
F F F F
Set [WINS] to active and enter the IP address of the WINS server in [Primary
WINS Server] and [Secondary WINS Server].
G G G G
Click [Refresh].
H H H H
Exit the Web browser.
I I I I
Restart the machine.
Using telnet
A A A A
Connect to the remote printer using telnet.
B B B B
Use the set command to make WINS active.
msh> set wins on
C C C C
Specify the IP addresses (primary and secondary) using the following com-
mands.
msh> wins primary IPaddress
msh> wins secondary IPaddress
Note
To confirm the current configuration, use the show command.
D D D D
Log off from telnet.
E E E E
Restart the machine.
Using DHCP
You can use the machine under a DHCP environment. You can also register the
printer NetBIOS name on a WINS server when it is running.
Note
Printers that register their NetBIOS name on a WINS server must be config-
ured for the WINS server.
Supported DHCP servers are Windows NT 4.0 Server Service Pack 4 or later,
Windows 2000 Server and NetWare 5.
If you do not use WINS server, reserve machine's IP address in DHCP server
so that the same IP address is assigned every time.
Precautions
7
117