Gestetner CP6244 Operating Instructions Manual page 219

N N N N
Type the name of the machine into the [Printer Name] box, and the name of
the print queue into the [Print Queue Name] box.
The default setting for Printer Name is "Print Server Name" followed by "_1"
and for Print Queue Name is "Print Server Name" followed by "_Q" (quota-
tion marks are not included). You can change them if necessary.
O O O O
If you have selected the NDS mode, type the volume of the print queue into
the [Queue Volume] box.
Clicking [Browse], you can select one of those shown in the [Browse] dialog
box.
P P P P
Click [Next >].
A dialog box to acknowledge the printing environment appears.
Q Q Q Q
Check the environment, and then click [Next >].
If you want to change the settings, click [< Back] and make the settings again.
Clicking [Next >], the NIB Setup Tool automatically creates the Print Server,
the Printer, and the Print Queue in the NetWare network.
R R R R
After the confirmation dialog box appears, select [Quit] and click [Finish] to
exit the NIB Setup Tool.
Quick Setup Using the NIB Setup Tool Wizard
5
55