- Address
-
-
-
Subnet Mask
A number used to mathematically "mask" or hide the IP address on the net-
work by eliminating those parts of the address that are alike for all the ma-
chines on the network.
Default Gateway Address
A gateway is a connection or interchange point that connects two networks.
A gateway address is for the router or host computer used as a gateway.
Note
To get the above addresses, contact your network administrator.
Access Control
Use the access command to view and configure access control.
You can also configure multiple access controls with the multi command.
Reference
msh> access
Configuration
msh> access parameter address
Parameter
control
mask
Note
The Access Control Address and the Access Control Mask are used to limit
access to the computer used for printing by denying access to users based on
their IP address. If it is not necessary to limit access, set the Access Control
Mask to "0.0.0.0".
When the Access Control Address matches the masked result of the IP ad-
dress computer attempting to print, print jobs from that IP address will be ac-
cepted by the Network Interface Board.
Meaning
Access Control Address
Access Control Mask
Remote Maintenance by telnet (mshell)
7
93