Gestetner CP6244 Operating Instructions Manual page 272

Appendix
NetWare (When the Network Interface Board is started)
When working as a print server
Access to NetWare server "file server name"
denied. Either there is no account for this
print server on the NetWare server or the
password was incorrect.
Attach to print queue "print queue name"
Login to fileserver "file server name"
("NDS|BINDERY")
Open log file "file name"
Printer "printer name" has no queue
Print queue "print queue name" cannot be
serviced by printer 0, "print server name"
The print server received error "error
number" during attempt to log in to the net-
work. Access to the network was denied.
Verify that the print server name and pass-
word are correct.
7
When working as a remote printer
Cannot create service connection
Cannot find the printer ("print server
name"/"printer number")
Establish a connection with the print server,
"print server name"
No local target for "print server name"
Required file server ("file server name") not
found
Could not to attach to print server ("print
server name")
108
Cannot log in to the file server. Confirm that
the print server is registered on the file serv-
er. If a password is specified for the print
server, delete it.
Attached to the print queue.
Logged in to the file server with NDS or
BINDERY mode.
The specified log file has been opened.
The print queue is not assigned to the ma-
chine. Using NWAdmin, assign the print
queue to the machine, and then restart it.
Print services are not available for the print
queue. Confirm that the volume of the print
queue exists on the specified file server.
Cannot log in to the file server. The print
server is not registered or the password is
specified. Register the print server without
specifying a password.
Cannot establish a connection with the file
server. Your request may exceed the maxi-
mum number of connections that the file
server can deal with at a time.
The printer having the number displayed on
the print server does not exist. Confirm the
number of the machine registered to the
print server.
A connection with the print server has been
established.
Cannot get routing information about the file
server. If a different frame type is configured
from that used on the network, you should
select "Auto Select" as a frame type.
Cannot find the required file server.
Cannot connect to the print server. The print
server refuses a connection for some reason.
Confirm the configuration of the print serv-
er.