Appendix; Using Smartdevicemonitor For Admin - Gestetner CP6244 Operating Instructions Manual

Using SmartDeviceMonitor for Admin

Using SmartDeviceMonitor for Admin, you can not only monitor the status of
network printers, but also change the configuration of the Network Interface
Board using the TCP/IP protocol or IPX/SPX protocol.
SmartDeviceMonitor for Admin can do the following.
• Limit the settings available from the control panel, and disable changes made
to some items.
• Enable selecting the paper type loaded in the printer.
• Check information about printing, paper exhaustion, and such on the compu-
ter.
• Monitor multiple printers at the same time. When there are many printers,
you can create groups and classify the printers to facilitate management.
• Check the printer's network settings and detailed information of devices.
• Enable you to change the printer's network settings.
• Check the number of pages printed for each computer using the user codes.
OS
Microsoft Windows 95/98/Me
Microsoft Windows 2000
Microsoft Windows XP
Microsoft Windows NT 4.0
Note
Select the appropriate protocol stack for your operating system.

7. Appendix

Protocol Stack
TCP/IP provided with Windows 95/98/Me
IPX/SPX provided with Windows 95/98/Me
NetWare network client provided with Windows 95/98
Novell Client for Windows 95/98
TCP/IP provided with Windows 2000
IPX/SPX provided with Windows 2000
NetWare Client provided with Windows 2000
Novell Client for Windows NT/2000
TCP/IP provided with Windows 2000
IPX/SPX provided with Windows 2000
TCP/IP provided with Windows NT
IPX/SPX provided with Windows NT
Client Service for NetWare provided with Windows
NT
Novell Client for Windows NT/2000
77