Gestetner CP6244 Operating Instructions Manual page 351

[Printer Features]
"Printer-Side Operation"
Settings can be made using the printer driver on the computer and the ma-
chine's display panel. When "Printer-Side Operation" is set to "On", the
following items can be set on the display panel:
• Number of print sets
• Clear Modes
• Auto-Print after Master Making
• Eco. Mode
• Job Separator
• Speed Select
• Skip Feed
• Sort
Note
"Auto-Print after Master Making" is displayed on the machine's dis-
play panel as "Auto Cycle".
"Clear Modes"
When set to "On", the machine settings return to their defaults before Mas-
ter Making.
"Auto-Print after Master Making"
When set to "On", printing starts automatically immediately after Master
Making.
"Eco. Mode"
When set to "On", the amount of ink consumption is reduced.
"Job Separator"
When set to "On", classifying will occur whenever the document data
changes.
Note
When using Type A, this function is available.
"Speed Select"
You can select the printing speed.
"Skip Feed"
• Use to make the interval between paper feeds longer, allowing the ink
to dry.
• Use to print paper longer than the standard size.
Windows 2000/Windows XP
1
11