Gestetner CP6244 Operating Instructions Manual page 475

Using the Document Feeder in Stack
Memory Mode
Reference
For details of the Stack Memory
mode, see p.45 "Stack Memory
Mode".
A
Press the {Memory/Class} key.
B
Use the {~}{}} keys to select
Memory, and then press the {OK}
key.
C
With the number keys, enter the
desired number of prints for each
class, and then press the {q} key.
Note
❒ Repeat this step until you have
entered for all your classes.
D
Press the {OK} key.
E
If you are using the optional tape
dispenser, turn on the tape dis-
penser switch.
F
Place the original face up in the
document feeder.
G
Press the {Master Making} key.
Printing starts automatically after
the trial print.
Note
❒ If you wish to check the image
AQN036S
before printing, press the {Auto
Cycle} key before pressing the
{Master Making} key, in order to
disable Auto Cycle mode. See
p.18 "When Auto Cycle mode is
off".
Optional Document Feeder
AQN024S
2
69