Machine Interior - Gestetner CP6244 Operating Instructions Manual

Machine Interior

1.
Main switch
Use to turn the power on or off.
2.
Master eject box
Used masters are stored here.
3.
Paper alignment wings
Lift or lower the wings according to the
type of paper used.
4.
Paper delivery side plates
Use to align the prints on the paper deliv-
ery tray.
5.
Paper delivery end plate
Use to align the leading edge of the
prints.
6.
Paper delivery tray
Completed prints are delivered here.
7.
Chocks
Use to adjust the buffer fins.
8.
Drum unit
The master is wrapped around this unit.
2
9.
Drum unit lock lever
Lift to unlock and pull out the drum unit.
10.
Ink holder
Set the ink cartridge in this holder.
11.
Drum position indicator
It is shown that the drum is in the stan-
dard position when a green lamp is on.
12.
Exposure glass
Position originals face down on the expo-
sure glass.
AQN020S