Gestetner CP6244 Operating Instructions Manual page 187

Setting Up a Client Computer
This section describes the procedures for setting up a client on a network that
uses Windows 2000/Windows XP, Windows NT Server or Windows NT Work-
station as a print server.
When using a Windows 2000/Windows XP, Windows NT print server, select a
shared printer on Windows 2000/Windows XP or Windows NT.
Note
This section assumes that the client has already been configured to communi-
cate with a Windows 2000 or Windows NT print server. Do not begin the fol-
lowing procedure until the client has been set up and configured correctly.
Use the [Printers] window to set up the machine.
A A A A
Click [Start], point to [Settings], and then click [Printers].
B B B B
Double-click the [Add Printer] icon.
This launches the Add Printer Wizard.
C C C C
Click [Next >].
D D D D
Click [Network printer], and click [Next >].
E E E E
Click [Next >].
F F F F
In the [Shared printers:] box, double-click the name of the computer used as
a print server.
The printers attached to the network are displayed.
W2kNTP001E
Setting Up a Client Computer
2
23