Gestetner CP6244 Operating Instructions Manual page 193

Using SmartDeviceMonitor for Client
SmartDeviceMonitor for Client is a utility for printing with the network printer
using the TCP/IP, and IPP protocols. The following features are available when
using SmartDeviceMonitor for Client.
SmartDeviceMonitor for Client features
• Sends a print job directly to the network printers without using a print
server.
• Notifies when a printing error occurs.
• That print did completion (data transmission is finished) is informed.
Limitation
On a computer that is used as a print server, do not use the features such as
Notify. For more information about turning off these features, see SmartDe-
viceMonitor for Client Help.
Note
Make sure to close all applications before beginning the installation process.
Installing SmartDeviceMonitor for Client may require the computer to be re-
started.
Installing SmartDeviceMonitor for Client
Follow the procedure below to install SmartDeviceMonitor for Client.
Note
When there is a printing port used by PortNavi, Multi Direct Print and Print-
ing System95, SmartDeviceMonitor for Client will take over.
When using SmartDeviceMonitor for Admin, install SmartDeviceMonitor for
Client after SmartDeviceMonitor for Admin is closed.
Make sure to close all applications before beginning the installation process.
Installing SmartDeviceMonitor for Client may require the computer to be re-
started.
A A A A
Insert the CD-ROM labeled "Printer Drivers and Utilities" into the CD-
ROM drive.
B B B B
Open [Control Panel], and double-click the [Add/Remove Programs] icon.
C C C C
On the [Add New Programs] tab, click [CD or Floppy].
D D D D
Click [Next >].
Using SmartDeviceMonitor for Client
3
29