Gestetner CP6244 Operating Instructions Manual page 350

Raster Printer Language - Setting Up for Printing
[Paper/Quality] tab
Set the Paper Feed Tray to be used.
1
[Tray Selection]
Specifies Paper Feed Tray for printing.
Note
Select "Paper Feed Tray" here. Even if you select "Automatically Select",
the machine uses Paper Feed Tray for printing.
[Advanced Options] dialog box
This dialog box is displayed when you click [Advanced] on the [Paper/Quality] tab
or the [Layout] tab. Here you can set detailed items about the paper size and the
functions of the machine.
[Paper/Output]
"Paper Size"
Select the size of the paper to be printed.
"Collated"
If you select more than "2" in "Copy Count", "Collated" will become ena-
bled. Make sure to regularly clear the "Collated" check box, because if
"Collated" is not cleared, master making may be done everytime a page is
going to be printed.
[Document Options]
"Advanced Printing Features"
Specifies whether the advanced printing feature is enabled. For normal
printing, leave the advanced printing feature set to the default "Enabled".
Note
Normally, it is not necessary to change the default.
"Halftoning"
Specifies the type of halftoning to use when printing graphics.
Note
Normally, it is not necessary to change the default.
"Print Optimizations"
Specifies whether the print optimization feature is enabled.
Note
Normally, it is not necessary to change the default.
10