Gestetner CP6244 Operating Instructions Manual page 229

N N N N
Assign print queues to the created printer as follows:
A Click [Assignments], and click [Add] in the [Assignments] group.
B In the [Available objects] box, click the queue created in step
[OK].
C Click [Configuration], and in the [Printer type] box, select [Parallel] using the
drop-down menu, and then click [Communication].
D Click [Manual load] in the [Communication type] group, and click [OK].
E Check the settings, and then click [OK].
O O O O
Create a print server as follows:
A Select the context specified using the NIB Setup Tool (step
the [Object] menu, click [Create].
B In the [Class of new object] box, click "Print Server", and click [OK]. When
you are using NetWare 5/5.1, click "Print Server (Non NDPS)".
C In the [Print Server name] box, type the name of the print server.
Important
Use the same name as that specified using the NIB Setup Tool. (Step
D Select the [Define additional properties] check box, and click [Create].
P P P P
Assign the printer to the created print server as follows:
A Click [Assignments], and click [Add] in the [Assignments] group.
B In the [Available objects] box, click the printer created in step
[OK].
C Check the settings, and then click [OK].
Note
If the machine works as configured, the name of the print server ap-
pears as an attached user.
Using Pure IP in the NetWare 5/5.1 environment
A A A A
Log on to the file server as an Admin or an Admin equivalent.
B B B B
Run the NIB Setup Tool.
Reference
p.52 "Running the NIB Setup Tool"
C C C C
Click [Property Sheet] and click [OK].
The [Network board list] dialog box appears.
D D D D
Click [TCP/IP protocol].
NetWare 4.x, 5/5.1 - Advanced Settings
L L L L
, and click
-A A A A ), and on
I I I I
M M M M
, and click
5
H
)
65