Recalling The Stored Settings - Gestetner CP6244 Operating Instructions Manual

Operation

Recalling the Stored Settings

A
Press the {Memory/Class} key.
1
B
Use the {~}{}} keys to select Re-
call, and the press the {OK} key.
C
Use the {~}{}} keys to select the
number to recall, and then press
the {OK} key.
D
Confirm that the settings are cor-
rect, and then press the {OK} key.
Note
❒ To change the stored settings,
use the {~}{}} keys to select
t h e i t e m t h a t y o u w i s h t o
change, and then overwrite us-
ing the number keys.
E
Set your original.
52
F
Press the {Master Making} key.
Printing starts automatically after
the trial print.
AQN036S
Note
❒ If you wish to check the image
before printing, press the {Auto
Cycle} key before pressing the
{Master Making} key, in order to
disable Auto Cycle mode. See
p.18 "When Auto Cycle mode is
off".
AQN024S