Printing Problems
Problem
When you try to select several
functions at the same time,
some of them cannot be select-
ed.
Parts of the image are not
printed in Edge Erase mode.
Prints are blank, or parts of
the image are not printed.
Printing in a second color is
unsatisfactory.
An uneven solid image ap-
pears.
Printing Problems When Using Combine Mode
Problem
Prints are blank or parts of the
image are not printed.
The image is not printed cor-
rectly.
Cause
Some functions cannot be
used together.
The edge erase margin that
you set is too wide.
The original has very narrow
margins.
The paper feed side plates are
not set correctly.
The first color is still wet.
Large solid image wrinkles
the master.
Cause
Original size and orientation
are not correct.
The originals were fed in the
wrong order.
Printing Problems
Action
See p.130 "Combination
Chart".
Adjust the edge erase margin
with the user tools. See "5
Margin Eras.Area" on p.78 "3
Initial Setting".
Make sure that the paper feed
side plates touch the paper
lightly.
Wait until the first color be-
comes dry.
Increase the printing speed or
use Photo mode.
Action
You cannot combine originals
of different sizes and orienta-
tions
When using the optional doc-
ument feeder, place the origi-
nals face up. The first original
should be on the top.
When using the exposure
glass, place the originals face
down on the exposure glass.
The first original should be
placed first.
5
97