Gestetner CP6244 Operating Instructions Manual page 174

Windows 95/98/Me Configuration
Setting Up a Client Computer
This section describes the procedures for setting up a client on a network that
uses Windows 2000/Windows XP, Windows NT Server or Windows NT Work-
1
station as a print server.
When using a Windows 2000/Window XP or Windows NT print server, select
a shared printer on Windows 2000/Windows XP or Windows NT.
Note
This section assumes that the client has already been configured to communi-
cate with a Windows 2000 or Windows NT print server. Do not begin the fol-
lowing procedure until the client has been set up and configured correctly.
A A A A
Install the printer driver as a local printer.
Reference
For more information about installing the printer driver, see Printer Refer-
ence 1.
Note
Any port can be selected during the installation, however, LPT1 is recom-
mended.
B B B B
Click [Start], point to [Settings], and then click [Printers].
C C C C
Click the icon of the machine you want to use. On the [File] menu, click
[Properties].
D D D D
Click the [Details] tab, and click [Add Port].
E E E E
Click [Network], and click [Browse].
10