Gestetner CP6244 Operating Instructions Manual page 196

Windows XP Configuration
Setting Up the Printer Driver
The following procedure allows you to configure the printer port to use Smart-
DeviceMonitor for Client.
Preparation
The target machine must be turned on before starting the installation process.
A A A A
Install the printer driver of the machine you want to use.
B B B B
From the [Printers] window, click the icon of the machine. On the [File]
3
menu, click [Properties].
C C C C
Click the [Ports] tab, and then click [Add Port].
The [Add Port] dialog box appears.
D D D D
Click [SmartDeviceMonitor] in the [Available port types:] box, and then click [New
Port].
The [Select Printer] dialog box appears.
The displayed items are as follows:
Model Name: The model name of the printer.
Printer Name: The name of the printer.
Comment: Additional information about the printer.
Address: The IP address of the printer.
E E E E
Select the machine.
TCP/IP
A Click [TCP/IP], and then click [search].
A list of printers that can be printed to by the TCP/IP protocol appears.
B Click the machine you want to use, and then click [OK].
Note
Printers that respond to an IP broadcast from the computer will be dis-
played. To print to a printer not listed here, click [Specify Address], and
then type the IP address or host name.
IPP
A Click [IPP].
The IPP setting dialog box appears.
32