Gestetner CP6244 Operating Instructions Manual page 307

E E E E
If necessary, make the Network boot settings.
A Select [7 Network] using the { { { { ~ ~ ~ ~ } } } } key or { { { { } } } } } } } } key.
B Press the { { { { OK} } } } key.
The network boot settings screen appears.
C Select the Network boot to be set using the { { { { ~ ~ ~ ~ } } } } key or { { { { } } } } } } } } key.
ARP&BOOTP
ARP&RARP&BOOTP
None (Factory Settings)
RARP&BOOTP
*1
The valid methods are in order from the left: ARP+PING, RARP+TFTP,
BOOTP, DHCP.
Note
❒ It is necessary to set the server when using RARP+TFTP, BOOTP, and
DHCP.
❒ When setting the IP address on the control panel, use None.
Reference
See Network Printing Guide when using DHCP.
D Press the { { { { OK} } } } key.
This completes the Network boot settings.
Item
ARP+PING
ARP&RARP
RARP+TFTP
BOOTP
DHCP
Valid method
AP RA BO
b
b b
b b
b b b
b
b
b b
Network Settings
1
*1
DH
b
13