Adjusting The Print Image Density - Gestetner CP6244 Operating Instructions Manual

Adjusting the Print Image Density

You can adjust the print image densi-
ty to suit your needs.
Note
❒ You can specify the image density
that is selected by default when the
power is turned on. See "1 MSTR
Makg.Density" on p.74 "3 Initial
Setting".
A A A A
Press the { { { { Image Density} } } } key.
Note
❒ If your original has a colored
background such as red or blue,
select a lighter image density to
prevent the prints from appear-
ing dirty.
B B B B
Set your original.
C C C C
Enter the number of prints with
the number keys.
D D D D
Press the { { { { Start} } } } key.
Printing starts automatically after
the trial print.
Note
❒ If you wish to check the image
before printing, press the { { { { Auto
Cycle} } } } key before pressing the
{ { { { Start} } } } key, in order to disable
Auto Cycle mode. See p.17
ZLKS080N
"When Auto Cycle mode is off".
ZLKS032N
Adjusting the Print Image Density
1
ZLKS030N
23