Control Panel; Keys - Gestetner CP6244 Operating Instructions Manual

Control Panel

Keys

{ { { { Quality Start} } } } key
1.
Press to have the machine perform a few
idle spins before printing. See p.57
"Quality Start Mode".
{ { { { Security} } } } key
2.
Press to make prints from confidential
documents. See p.55 "Security Mode".
{ { { { Skip Feed} } } } key
3.
Press to select skip feed printing. See p.52
"Skip Feed Printing".
{ { { { } } } } and { { { {
4.
Press to fine-tune the reproduction ratio.
See p.29 "Zoom".
{ { { { Edge Erase} } } } key
5.
Press to select erase margins on the
prints. See p.30 "Edge Erase".
{ { { { Tint} } } } key
6.
Press to make halftone prints. See p.24
"Tint Mode".
{ { { { Economy Mode} } } } key
7.
Press to save ink. See p.33 "Economy
Mode".
{ { { { Job Reset} } } } key
8.
Press to stop the optional PC controller.
4
} } } } keys (Zoom keys)
{ { { { Type of Original} } } } key
9.
Press to select Letter, Photo or Let-
ter/Photo mode. See p.32 "Type of Orig-
inal".
{ { { { Reduce/Enlarge} } } } key
10.
Press to reduce or enlarge the image by
preset ratios. See p.27 "Preset R e-
duce/Enlarge".
{ { { { Full Size} } } } key
11.
Press to make full size prints.
{ { { { Combine/Repeat} } } } key
12.
Press to combine two originals onto one
print. See p.49 "Combine".
Press to repeat the image of an original
on one print. See p.51 "Repeat".
{ { { { Memory/Class} } } } key
13.
Press to select Memory or Class modes.
See p.35 "Memory/Class".
{ { { { W W W W } } } } and { { { { V V V V } } } } keys (Speed keys)
14.
Press to adjust the printing speed. See
p.25 "Changing the Printing Speed".
{ { { { Image Position} } } } key
15.
Press to shift the image forwards or back-
wards. See p.21 "Adjusting the Print Im-
age Position".
ZLKS010N