Troubleshooting; Machine Operation Problems - Gestetner CP6244 Operating Instructions Manual

Machine Operation Problems

If a malfunction or a misfeed occurs within the machine, the following indicators
will be shown on the display.
❖ ❖ ❖ ❖ When the misfeed indicator (x
Indicator
x and "P"
x and "A"
x and "B"
x and "C"
x and "D"
x, "A" and "B"
x, "B" and "E"
R CAUTION:
• Be careful not to cut yourself on any sharp edges when you reach inside the
machine to remove misfed sheets of paper or masters.
Note
❒ Do not leave any torn scraps of paper within the machine.
❒ Misfeeds may occur at more than one location at the same time. Check the lo-
cation indicators and ensure that all the misfeeds are thoroughly cleared.
❒ When clearing misfeeds, do not turn off the main switch. If you do, your copy
settings are cleared.
❒ If misfeeds occur repeatedly, contact your service representative.
❖ ❖ ❖ ❖ When the open cover/unit indicator (M
Indicator Message
M
Doors/Covers open.
Close Front cover.
M and "P"
Doors/Covers open.
Close ADF cover.

5. Troubleshooting

x ) lights and the location indicators are displayed x x
Page
p.94 "When "x" lights and "P" is indicated"
p.96 "When "x" lights and "A" is indicated"
p.97 "When "x" lights and "B" is indicated"
p.98 "When "x" lights and "C" is indicated"
p.101 "When "x" lights and "D" is indicated"
p.102 "When "x" lights and "A", "B" are indicated"
p.103 "When "x"lights and "B", "E" are indicated"
M ) lights and a message is displayed
M M
Page
p.105 "When the Open Cover/Unit Indi-
cator (M) Lights and a Message is Dis-
played"
91