Gestetner CP6244 Operating Instructions Manual page 274

Appendix
When using rsh, rcp, ftp
Can't build data connection: "message"
cmd_name:Command not supported
command line too long
file_name:No such file or directory
filter data error
get log busy
lost connection
7
no more ftp execute
print requests full
printer busy
printer permission denied
printer refuse
At the beginning of the message, the IP address is displayed in parentheses.
110
Cannot establish a connection for data trans-
fer due to the displayed error. Check the ftp
of the workstation that requested the print
job, and start it again. When using ftp, this
message remains only on the system log in-
formation.
The remote shell command using cmd_name
is not supported. You should use only the
print, stat, syslog and info, commands. You
should access the machine only with rsh and
rcp remote shell commands.
The command line is too long.
You must use a file name with the srat, sys-
log, info and instal commands.
Some of the data cannot be handled with the
filter option. Confirm the file code and the
settings of the filter option.
Another machine is getting the log informa-
tion. You should get it afterwards.
The connection was cut by the other party.
Check the ftp of the workstation that re-
quested the print job, and start it again.
When using ftp, this message remains only
on the system log information.
More than three users at a time cannot log in
using ftp. Since there are three other users
that have already logged in, wait until the
job is finished.
Cannot accept the print request.(max. five
sessions) Confirm the status of the machine
with lpq, rsh, rcp, and ftp commands, and
print it again after the number of print re-
quests (sessions) becomes less than five.
However, the maximum request when using
ftp command is 3.
Cannot get the machine information. Anoth-
er user may be accessing it. Wait a few min-
utes before trying again.
Cannot get a permission to use the machine.
Confirm the access right with the access con-
trol address and the access control mask.
Something is wrong with the machine. Con-
firm the status of the machine.