Stack Memory Mode - Gestetner CP6244 Operating Instructions Manual

G
Press the {Master Making} key.
Printing starts automatically after
the trial print.
Note
❒ If you wish to check the image
before printing, press the {Auto
Cycle} key before pressing the
{Master Making} key, in order to
disable Auto Cycle mode. See
p.18 "When Auto Cycle mode is
off".
Reference
For details on how to use the
optional document feeder when
printing in Memory mode, see
p.67 "Using the Document
Feeder in Normal Memory
Mode".

Stack Memory Mode

Limitation
❒ To use Stack Memory mode, you
need to first set Memory Mode to
"Stack" using the user tools. See
"12 Memory Mode" on p.79 "4
Mode Setting".
Note
❒ You can make prints for up to 30
AQN024S
classes at one time.
A
Press the {Memory/Class} key.
B
Use the {~}{}} keys to select
Memory, and then press the {OK}
key.
C
With the number keys, enter the
desired number of prints for each
class, and then press the {q} key.
Note
❒ Repeat this step until you have
entered for all your classes.
Memory Mode
1
AQN036S
45