Gestetner CP6244 Operating Instructions Manual page 218

NetWare Configuration
E E E E
Click to select the IPX address of the Network Interface Board you are con-
figuring, and then click [Next >].
Note
If you do not know which Network Interface Board you are configuring,
print a system configuration list to check the MAC address (Network ad-
dress).
F F F F
Make sure that the MAC address and IPX address are correct, and click [Fin-
ish].
G G G G
Type the print server name into the [Device Name] box, and click [Next >].
The default setting is "RDP_" followed by the 6 digit serial number. We rec-
ommend that you change it to something that is easier to remember or some-
thing based on the structure of the network.
H H H H
In a dialog box for selecting a network environment, click to select the [Net-
Ware] check box and click to clear the [TCP/IP] check box.
5
I I I I
Click [Next >].
A dialog box for configuring the NetWare environment appears.
J J J J
Select [Bindery] when printing under Bindery mode, or select [NDS] when
printing under NDS mode.
When you are using NetWare version 4.x, you should select [NDS].
K K K K
If you selected [Bindery], type into the [File Server Name:] box the name of the
file server in which a print server is to be created.
After clicking [Browse], you can select a file server among those listed in the
[Browse] dialog box.
L L L L
If you selected [NDS], type into the [Tree:] box the name of the NDS tree in
which the print server is created, and type the context into the [Context:] box.
Clicking [Browse], you can select an NDS tree and an NDS context among
those listed in the [Browse] dialog boxes.
As a context, object names are typed from a lower object and divided by a pe-
riod. For example, if you want to create a print server into NET under DS,
type "NET.DS".
M M M M
Click [Next >].
54