When the Master End Indicator (C) Lights
The master end indicator (C) lights
up when it is time to replace the mas-
ter roll.
A
Pull out the master tray.
B
Press the release button to open the
master feeding cover.
C
Unwrap the tape from the new mas-
ter roll.
When the Master End Indicator (C) Lights
D
Remove the used master roll and
pull out both spools. Then, insert
both spools into a new master roll.
Note
ZFRH220E
❒ It is necessary to replace the mas-
ter roll even if some master re-
mains on the old roll.
E
Set the new master roll in the mas-
ter tray.
ZJVH070E
ZJVH120E
4
TSLT010E
ZFRH260E
91