Gestetner CP6244 Operating Instructions Manual page 233

C In the [Printer name] box, type the name of the printer.
D Select the [Define additional properties] check box, and click [Create].
N N N N
Assign print queues to the created printer as follows:
A Click [Assignments], and click [Add] in the [Assignments] group.
B In the [Available objects] box, click the queue created in step
[OK].
C Click [Configuration], and in the [Printer type] box, select [Parallel] using the
drop-down menu, and then click [Communication].
D Click [Manual load] in the [Communication type] group, and click [OK].
E Check the settings, and then click [OK].
O O O O
Create a print server as follows:
A Select the context specified using the NIB Setup Tool (Step
the [Object] menu, click [Create].
B In the [Class of new object] box, click "Print Server", and click [OK]. When
you are using NetWare 5/5.1, click "Print Server (Non NDPS)".
C In the [Print Server name] box, type the name of the print server.
Important
Use the same name as that specified using the NIB Setup Tool. (Step
D Select the [Define additional properties] check box, and click [Create].
P P P P
Assign the printer to the created print server as follows:
A Click [Assignments], and click [Add] in the [Assignments] group.
B In the [Available objects] box, click the queue created in the step
click [OK].
C In the [Printers] group, click the printer assigned in step B B B B , and click
[Printer Number].
D Type the printer number and click [OK].
Important
Use the same number as that specified as Remote Printer No. using the
NIB Setup Tool. (Step
E Check the settings, and then click [OK].
Q Q Q Q
Start the print server by typing the following from the console of the Net-
Ware Server.
If it is running, restart it after exiting it.
To exit
CAREE: unload pserver
To start
CAREE: load pserver print_server_name
I
-E).
NetWare 4.x, 5/5.1 - Advanced Settings
L L L L
, and click
-A A A A ), and on
I I I I
5
H
).
M M M M
, and
69