Gestetner CP6244 Operating Instructions Manual page 194

Windows XP Configuration
E E E E
Type the name of the CD-ROM drive in the [Open] box, followed by ":\
NETWORK\NETMON\CLIENT\DISK1\SETUP.EXE" (do not include
the quotation marks), and then click [Finish].
Note
An example would be "D:\ NETWORK\NETMON\CLIENT\DISK1\SET-
UP.EXE" when the CD-ROM drive letter is "D".
F F F F
From the [Choose Setup Language] list, select the language you want to use,
and then click [OK].
G G G G
3
After the [Welcome] dialog box appears, click [Next >].
Follow the instructions on the screen.
After the installation is complete, configure the printer port with SmartDe-
viceMonitor for Client. See p.32 "Setting Up the Printer Driver".
Note
If the dialog box asking if you want to restart the computer appears, select
[Yes, I want to restart my computer now.].
Deleting the port
The following procedure allows you to delete the printer port. If you want to de-
lete the port which is currently used in Windows, switch the port to another such
as "FILE", then delete it.
Reference
For more information about SmartDeviceMonitor for Client, see SmartDe-
viceMonitor for Client Help.
A A A A
From the [Printers] window, click the icon of the machine which uses Smart-
DeviceMonitor for Client to print. On the [File] menu, click [Properties].
B B B B
Click the [Ports] tab and make sure that the SmartDeviceMonitor for Client
port is shown in the [Print to the following port(s)] box.
Remember the port name because this port should be deleted later.
C C C C
Select the [FILE] check box in the [Port] column.
D D D D
Click [OK] to close the Printer Properties.
The port which is currently in use is changed.
E E E E
Open the Printer Properties of the same machine.
F F F F
Select the [Ports] tab.
G G G G
At the [Port] column in the [Print to the following port(s)] dialog box, click to se-
lect the SmartDeviceMonitor for Client port name as in step
30
B B B B
.