Message List; System Log Information - Gestetner CP6244 Operating Instructions Manual

Message List

This is a list of messages written to the machine's system log. The system log can
be viewed using the syslog command.

System Log Information

You can use the following methods to view the system log.
• mshell : Use the syslog command. See p.96 "System log information".
Message when the Network Interface Board starts or restarts
Network Interface Board Ver.x.x.x
PRINTER SYSTEM "system name" Ver.x.x.x
Attach FileServer="file server name"
Current Interface Speed:xxxMbps
Current IPX address
Frametype="frame type name"
NetBEUI Computer Name="computer name" The NetBEUI Computer Name is defined as
Start httpd
Start npmpd for IPX
Start npmpd for TCP/IP
Start smbd direct print mode(NetBEUI)
Start snmpd Ver.2.0
Vendor= , Country= , Lang=
The version number of the Network Interface
Board.
The system name and version of the machine.
The machine is attached to "file server name"
as the nearest server.
The speed of the network (10 Mbps or 100 Mb-
ps).
The current IPX address.
The "frame type name" is configured to be
used on NetWare.
"computer name".
The Web server has been started.
The npmpd for IPX protocol has been started.
The npmpd for TCP/IP protocol has been
started.
You can print from a client on the Windows
network via the print server.
The SNMP agent of the displayed version has
been started.
The vendor, the country code, and the lan-
guage.
Message List
7
107