Gestetner CP6244 Operating Instructions Manual page 198

Windows XP Configuration
Configuring LPR Port Printing
This section explains the procedure for printing to a LPR port from Windows
XP.
Note
The following procedure assumes that the printer drivers have already been
installed. This is the procedure to change the printer port to LPR.
The TCP/IP protocols must be installed and configured correctly. For more
information about configuring the protocols, see p.27 "Configuring TCP/IP
3
and IPP for Printing".
A A A A
Click [Start], point to [Settings], and then click [Printers].
B B B B
Click the icon of the machine you want to use. On the [File] menu, click
[Properties].
C C C C
Click the [Ports] tab, and then click [Add Port].
D D D D
In the [Available port types:] box, click "LPR Port", and then click [New Port].
Note
If "LPR Port" does not appear, "Print Services for Unix" has not been in-
stalled.
E E E E
Type the IP address of the Network Interface Board into the [Name or address
of server providing lpd:] box.
F F F F
Type "lp" into the [Name of printer or print queue on that server:] box, and click
[OK].
G G G G
Click [Close].
H H H H
Make sure that the port name is displayed in the [Print to the following port(s)]
box and the check box is selected, and then click [OK].
34