Displaying The Status Of Printers - Gestetner CP6244 Operating Instructions Manual

Appendix
F F F F
Click [Apply].
The settings are transmitted to the printer.
G G G G
Exit the Web browser.

Displaying the Status of Printers

You can view the status of printers using SmartDeviceMonitor for Admin,
SmartDeviceMonitor for Client, or Web browser.
SmartDeviceMonitor for Admin
A A A A
Run SmartDeviceMonitor for Admin.
B B B B
Click the [Group] menu, point to [Open LAN], and then select [TCP/IP] or
[IPX/SPX].
The status of printers is indicated with an icon in the list.
Note
For more information about the status icons, see SmartDeviceMonitor for
Admin Help.
C C C C
For more information, click to select the desired printer from the list, and
7
then click [Open] on the [Device] menu.
The status of the printer is displayed in the dialog box.
Note
For more information about each item in the dialog box, see Help.
SmartDeviceMonitor for Client
To view the status of a printer using SmartDeviceMonitor for Client, you must,
in advance, configure SmartDeviceMonitor for Client so it monitors the printer
whose status you want to view.
Monitoring Printers
A A A A
Run SmartDeviceMonitor for Client.
The "Welcome to SmartDeviceMonitor for Client" screen appears.
Note
Click on [Do not show this message again.] to stop the message being dis-
played each time you launch SmartDeviceMonitor for Client.
The remaining instructions in this manual assume that this screen is not
displayed.
88