1B – 52 SOHC ENGINE MECHANICAL
INTAKE MANIFOLD
Removal Procedure
1. Remove the fuel pump fuse.
2. Start the engine. After it stalls, crank the engine for
10 seconds to rid the fuel system of fuel pressure.
3. Disconnect the negative battery cable.
4. Disconnect the engine control module (ECM) ground
terminal from the intake manifold.
5. Drain the engine coolant. Refer to Section 1D, En-
gine Cooling.
6. Disconnect the intake air temperature (IAT) sensor
connector.
7. Disconnect the air intake tube from the throttle body.
A102B001
8. Disconnect the idle air control valve (IAC) connec-
tor.
9. Disconnect the throttle position (TP) sensor connec-
tor.
10. Disconnect the engine coolant temperature (ECT)
sensor connector.
A102B016
DAEWOO T-154 BL2,3