Daewoo CIELO EURO III Manual page 84

1B – 72 SOHC ENGINE MECHANICAL
5. Move the piston to the bottom of the piston stroke.
6. Mark the connecting rod cap.
7. Remove the connecting rod cap bolts.
8. Remove the connecting rod cap and lower connect-
ing rod bearing.
9. Remove the upper piston connecting rod bearing.
10. Ridge ream the cylinder wall.
A102B079
Caution: Use care when handling the piston. Worn
piston rings are sharp and may cause injury.
11. Remove the piston.
12. Use a piston ring expander tool to expand the piston
rings.
13. Remove the piston rings.
A102B080
14. Remove the piston pin from the piston and connect-
ing rod assembly using the piston pin service set
KM-427.
15. Separate the piston from the connecting rod.
A102B081
DAEWOO T-154 BL2,3