Daewoo CIELO EURO III Manual page 155

1E – 27 ENGINE ELECTRICAL
Assembly Procedure
1. Clean all of the starter motor parts, but do not use
grease-dissolving solvents for cleaning the armature
and the field coils.
2. Lubricate the gears with lubricant. (Begin at Step 7 if
proceeding with just the reassembly of the solenoid.)
3. If full disassembly of the starter and the solenoid was
performed, begin reassembly by placing the gear
support on the driveshaft assembly.
A102E249
4. Install the drive and the pinion stop on the driveshaft.
A102E248
5. Install the lock ring into the groove on the driveshaft
and insert the collar.
6. Install the needle bearing.
A102E220
DAEWOO T-154 BL2,3