Daewoo CIELO EURO III Manual page 69

DAEWOO T-154 BL2,3
SOHC ENGINE MECHANICAL 1B – 57
21. Connect the air intake tube to the throttle body.
22. Connect the IAT sensor connector.
23. Connect the ECM ground terminal to the in-
take manifold.
24. Connect the negative battery cable.
25. Install the fuel pump fuse.
26. Refill the engine cooling system. Refer to Section
1D, Engine Cooling.
A102B001
EXHAUST MANIFOLD
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the ignition wires from the spark plugs.
3. Disconnect the oxygen (O
4. Remove the exhaust manifold heat shield bolts.
5. Remove the exhaust manifold heat shield.
6. Remove the auxiliary catalytic converter upper
flange nuts.
TAA1F480
7. Remove the eight exhaust manifold nuts in the se-
quence shown.
8. Remove the exhaust manifold.
9. Remove the exhaust manifold gasket.
10. Clean the sealing surfaces of the exhaust manifold
and the cylinder head.
A102B037
) sensor.
2