Daewoo CIELO EURO III Manual page 87

DAEWOO T-154 BL2,3
SOHC ENGINE MECHANICAL 1B – 75
12. Install a piston oil ring, the expander, and the sec-
ond piston oil ring to the bottom ring groove of the
piston.
13. Install the second compression ring to the middle
ring groove of the piston.
14. Install the top compression ring to the top ring
groove of the piston.
A102B086
15. Use a piston ring expander to install the piston rings.
Do not expand the piston rings beyond the expan-
sion necessary for installation.
16. Stagger the piston oil rings, the oil ring rail gaps, the
second compression ring, and the top compression
ring in relation to the notch on the top of the piston.
A102B089
17. Lubricate the cylinder wall and the piston rings with
clean engine oil.
18. Install the piston using a ring compressor and a
wood handle. Guide the lower connecting rod end to
prevent damaging the crankshaft journal.
19. Install the connecting rod cap and the bearings. Re-
fer to "Crankshaft Bearings and Connecting Rod
Bearings – Gauging Plastic" in this section.
A102B088