Daewoo CIELO EURO III Manual page 74

1B – 62 SOHC ENGINE MECHANICAL
12. Remove the right front wheel. Refer to Section 2E,
Tires and Wheels.
13. Remove the right front wheel well splash shield.
14. Remove the A/C compressor drive belt, if equipped.
15. Remove the alternator drive belt.
16. Remove the power steering pump pulley bolts.
17. Remove the power steering pump pulley.
A102B014
18. Drain the engine coolant. Refer to Section 1D, En-
gine Cooling.
19. Remove the cooling system radiator and the engine
cooling fans. Refer to Section 1D, Engine Cooling.
20. Disconnect the upper radiator hose from the ther-
mostat housing.
21. Disconnect the coolant surge tank hose from the ra-
diator.
22. Disconnect the power steering return hose from the
power steering pump, if equipped.
23. Drain the power steering system, if equipped.
24. Disconnect the power steering pressure hose from
the power steering pump, if equipped.
A102B015
25. Disconnect the electrical connector at the electronic
ignition (EI) system ignition coil, and the engine ECM
ground terminal at the intake manifold and at the
starter motor.
26. Disconnect the pre-converter oxygen (O
connector.
27. Disconnect the electrical connectors at the fuel in-
jectors.
28. Disconnect the idle air control (IAC) valve connec-
tor.
29. Disconnect the throttle position (TP) sensor connec-
tor.
30. Disconnect the engine coolant temperature (ECT)
sensor connector.
31. Disconnect the coolant temperature sensor (CTS)
connector and the knock sensor, if equipped.
A102B016
) sensor
2
DAEWOO T-154 BL2,3