Starter Motor - Daewoo CIELO EURO III Manual

DAEWOO T-154 BL2,3

STARTER MOTOR

Disassembly Procedure
1. Remove the starter. Refer to "Starter" in this section.
2. Remove the starter through-bolts.
A102E239
3. Remove the commutator end frame/brush holder as-
sembly.
4. Inspect the brushes, the pop-out springs, and the
brush holders for wear and damage. Replace the as-
sembly, if necessary.
A102E215
Important: This test should be made for each ground or
insulated brush to ensure continuity through both
brushes and leads. If the lamp fails to light, the field coil
is open and will require replacement.
5. For only those starters having a shunt coil connec-
tion, use a test lamp, placing one lead on the shunt
coil terminal while connecting the other lead to a
ground brush or an insulated brush.
A102E216
ENGINE ELECTRICAL 1E – 18
UNIT REPAIR