G Sensor; Evaporative Emission Canister - Daewoo CIELO EURO III Manual

DAEWOO T-154 BL2,3

G SENSOR

Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the G sensor electrical connector and re-
move the G sensor.
A402F071
Installation Procedure
1. Install the G sensor and connect the electrical con-
nector.
2. Connect the negative battery cable.
A402F071

EVAPORATIVE EMISSION CANISTER

Removal Procedure
Caution: Canister and vacuum hoses contain fuel
vapors. Do not smoke in the area or permit an open
flame.
1. Disconnect the evaporative (EVAP) emission canister
fuel vapor hoses.
2. Remove the bolt securing the EVAP emission canis-
ter flange to the vehicle.
3. Slide the EVAP emission canister out of the track
holder.
4. Remove the EVAP emission canister.
A102F020
ENGINE CONTROLS 1F – 403