Daewoo CIELO EURO III Manual page 68

1B – 56 SOHC ENGINE MECHANICAL
8. Install the fuel rail and the fuel injectors as an assem-
bly. Refer to Section 1F, Engine Controls.
9. Install the fuel rail retaining bolts.
Tighten
Tighten the fuel rail retaining bolts to 25 N m (18 lb-ft).
A402B010
10. Connect the fuel return line to the fuel pressure reg-
ulator.
11. Connect the fuel feed line to the fuel rail.
12. Install the throttle cable bracket and the two throttle
cable bracket bolts.
Tighten
Tighten the throttle cable bracket bolts to 8 N m
(71 lb-in).
13. Connect the throttle cable to the intake manifold and
the throttle body.
A402B005
14. Connect the fuel injector connectors to the fuel in-
jectors.
15. Connect all of the vacuum lines that were previously
disconnected.
16. Connect the heater inlet hose to the coolant distribu-
tor beneath the intake manifold.
17. Connect the surge tank coolant hose to the throttle
body.
18. Connect the ECT sensor connector.
19. Connect the IAC valve connector.
20. Connect the throttle position sensor connector.
A102B016
DAEWOO T-154 BL2,3