Daewoo CIELO EURO III Manual page 140

DAEWOO T-154 BL2,3
9. For vehicles with the DOHC engine, remove the
throttle body. Refer to Section 1F, Engine Controls.
10. Remove the fuel rail mounting bolts.
Notice: Take extreme care not to damage the fuel injec-
tor O-rings to prevent fuel leaks when the fuel rail is re-
seated.
11. Unseat the fuel rails from the cylinder head, and
slightly push the fuel rail assembly clear of the cylin-
der head in the direction of the master cylinder.
12. Remove the nut and the washers which hold the
generator lower bracket-to-generator bolt.
13. Carefully remove the generator.
A102E254
Installation Procedure
1. Install the generator at the generator lower bracket
and insert the generator bolts.
2. Install the nuts and the washers on the generator low-
er bracket-to-generator bolts (SOHC engine is
shown).
Tighten
Tighten the generator lower bracket-to-generator
nuts to 20 NSm (15 lb-ft).
A102E234
3. Install the serpentine accessory drive belt on vehicles
not equipped with power steering and air condition-
ing.
4. Secure the generator to the shackle bracket with the
bolt (SOHC engine is shown). For vehicles equipped
with power steering and air conditioning, refer to Sec-
tion 6B, Power Steering Pump.
Tighten
Tighten the generator shackle bracket bolt to 20 NSm
(15 lb-ft).
A102E231
ENGINE ELECTRICAL 1E – 12