Daewoo CIELO EURO III Manual page 100

1B – 88 SOHC ENGINE MECHANICAL
31. Mark the order of the rod bearing caps.
32. Remove the connecting rod cap bolts for all of the
pistons.
33. Remove the connecting rod bearing caps and the
lower connecting rod bearings.
34. Remove the upper connecting rod bearings.
A102B067
35. Mark the order of the crankshaft bearing caps.
36. Remove the crankshaft bearing cap bolts.
37. Remove the crankshaft bearing caps.
38. Remove the crankshaft bearings from the crank-
shaft bearing caps.
39. Remove the crankshaft.
40. Remove the crankshaft bearings from the engine
block.
41. Clean the parts, as necessary.
A102B068
Assembly Procedure
1. With crankshaft and bearings in place, plastic gauge
all bearing clearances. Refer to ''Crankshaft Bearings
and Connecting Rod Bearings – Gauging Plastic'' in
this section.
2. Inspect the crankshaft end play with the crankshaft
bearings installed.
3. Check for permissible crankshaft end play. Refer to
''Engine Specifications'' in this section.
A102B070
DAEWOO T-154 BL2,3