Daewoo CIELO EURO III Manual page 559

DAEWOO T-154 BL2,3
Installation Procedure
1. Lubricate a new O-ring with engine oil. Install the new
O-ring onto the fuel pressure regulator body.
2. Insert the fuel pressure regulator into the fuel rail
body.
3. Install the retaining bolt.
Tighten
Tighten the fuel pressure regulator retaining bolt to
12 NSm (106 lb-in).
4. Connect the vacuum hose to the fuel pressure regu-
lator.
5. Connect the fuel line to the fuel pressure regulator by
pushing the lock into place.
6. Connect the negative battery cable.
7. Perform a leak test of the fuel pressure regulator with
the engine OFF and the ignition ON.
A102F092
ENGINE CONTROLS 1F – 389