1B – 42 SOHC ENGINE MECHANICAL
29. Connect the air intake tube to the throttle body.
30. Connect the breather tube to the valve cover.
31. Connect the IAT sensor connector.
32. Connect the negative battery cable.
A102B001
OIL PUMP
Tools Required
KM-498-B Pressure Gauge
KM-135 Adapter
Engine Oil Pressure Inspection Procedure
1. Remove the right-hand wheel well splash shield.
2. Remove the oil pressure switch connector.
A102B019
3. Install the adapter KM-135 in place of the oil pressure
switch.
4. Connect the pressure gauge KM-498-B to the adapt-
er.
5. Start the engine and check the oil pressure at idle
speed and an engine temperature of 80 C (176 F).
Important: The minimum oil pressure should be 30 kPa
(8.88 psi).
6. Stop the engine and remove the oil pressure gauge
and the adapter.
A202B003
DAEWOO T-154 BL2,3