Daewoo CIELO EURO III Manual page 46

1B – 34 SOHC ENGINE MECHANICAL
27. Align the adjust arm hole of the timing belt automatic
tensioner to the hole in the timing belt automatic ten-
sioner bracket.
28. Insert a 4.5 mm driver through the adjust arm hole
and the tensioner bracket hole.
29. Rotate the crankshaft two full turns clockwise using
the crankshaft pulley bolt.
30. Rotate the crankshaft at least one full turn clockwise
using the crankshaft pulley bolt.
31. Remove the driver from the timing belt automatic
tensioner.
32. Loosen the coolant pump retaining bolts.
A102B039
33. Rotate the coolant pump until the adjust arm pointer
of the timing belt automatic tensioner is aligned with
the notch in the timing belt automatic tensioner
bracket.
34. Tighten the coolant pump retaining bolts.
Tighten
Tighten the coolant pump retaining bolts to 10 N m
(89 lb-in).
A102B041
35. Remove the crankshaft pulley bolt.
36. Install the lower timing belt cover.
37. Install the lower timing belt cover bolts.
Tighten
Tighten the lower timing belt cover bolts to 10 N m
(89 lb-in).
A102B008
DAEWOO T-154 BL2,3