Daewoo CIELO EURO III Manual page 47

DAEWOO T-154 BL2,3
SOHC ENGINE MECHANICAL 1B – 35
38. Install the crankshaft pulley.
39. Install the crankshaft pulley bolt.
Tighten
Tighten the crankshaft pulley bolt to 95 N m (70 lb-ft)
using a torque wrench. Use the angular torque gauge
KM-470-B to tighten the crankshaft pulley bolt anoth-
er 30 degrees plus 15 degrees.
A102B018
40. Install the upper timing belt cover.
41. Install the upper timing belt cover bolts.
Tighten
Tighten the upper timing belt cover bolts to 10 N m
(89 lb-in).
42. Install the power steering pump mounting bolts, if
equipped.
Tighten
Tighten the power steering pump mounting bolts to
25 N m (18 lb-ft).
43. Install the power steering pump pulley, if equipped.
44. Install the power steering pump pulley bolts, if
equipped.
Tighten
Tighten the power steering pump pulley bolts to
25 N m (18 lb-ft).
A102B005
45. Install the alternator drive belt.
Tighten
Tighten the alternator adjusting bolt to 25 N m (18 lb-
ft).
46. Install the A/C compressor drive belt, if equipped.
47. Install the right front wheel well splash shield.
48. Install the right front wheel. Refer to Section 2E,
Tires and Wheels.
49. Install the air cleaner housing.
50. Install the air cleaner housing bolts.
Tighten
Tighten the air filter housing bolts to 8 N m (71 lb-in).
A102B002